SKU: 858072K01

If you use ethanol blended fuel, add Mercury Fuel System Treatment & Stabilizer every time you fill up.

Or, if you use 100% petroleum or diesel fuel and do not use an entire tank of fuel within 30 days, add Mercury Fuel System Treatment & Stabilizer every time you fill up.**

E-10 (gasoline containing 10% ethanol) is prone to phase separation. Phase separation occurs when gasoline is saturated with too much water, causing it to separate and settle to the bottom of the fuel tank. Phase separated fuel can render your engine inoperable because the highly corrosive, watery solution can damage critical fuel system components. Mercury Fuel System Treatment & Stabilizer helps keep fuel fresh during the boating season and out of season storage.

Without treatment, fuel can go bad in a matter of weeks. Mercury Fuel System Treatment & Stabilizer helps protect your fuel system from:

• * Varnish and gum deposits
• * Rust, corrosion and oxidation
• * Moisture

Plus: Stabilizes fuel for up to one year.

Examples of deposits and clogging caused by non-treated gasoline.

Vapor separator :
Fuel injectors:
Gum, varnish and corrosion can alter spray patterns that do not burn properly. Fuel that is not burned properly can cause: * Poor performance * Reduced fuel economy * Costly injector cleaning or replacement

For use in all 2 cycle and 4 cycle gasoline outboard, sterndrive, inboard and jet drive marine engines and diesel marine engines.**

One 12 ounce (355 mL) bottle treats 30 gallons of gas.

** See your owner's manual for specific application and maintenance schedules.